Frequently Asked Question

Hoistcam Monitor Flashing White
Last Updated 4 years ago


The screen on the HoistCam monitor flashes or strobes multiple times.

Example video:


The auto iris is unable to react to the change in light automatically to adjust the brightness and contrast of the image from the camera's lens. This may occur when the voltage of the HoistCam goes below 12VDC.

Possible Solutions:

  1. Verify that the voltage in the HoistCam (LED green numbers on the side of the HoistCam) is above 12.1.
  2. Charge the battery in the HoistCam with a HoistCam charger.
  3. Reset the BMS (Battery Management System) of the Battery -

Please Wait!

Please wait... it will take a second!